ORIGINAL XHORSE VVDI PROG PROGRAMMER V4.4.4, $ 650 Опции

[Владимир]

VVDI PROG Programmer

PCF79XX Adapter V2 need to buy seperately http://obd.kiev.ua/index.php?route=product...;product_id=424
PCF79XX Adapter V2 for VVDI PROG

1. Supported Chip Models:

PCF7922 PCF7941 PCF7945 PCF7952 PCF7953 PCF7961

2. Two Optional Ways to Read Write PCF79XX Chip

(1) Remove the chip and put it in the IC socket, select option “PCF79XX chip” shown as follows.


(2) Connect wire to the circuit board, select option “PCF79XX adapter” shown as follows.


Note: If PCF79XX adapter option can't recognize chip due to the affection of circuit board, just remove chip and put it in IC socket, then use option “PCF79XX chip” to operate.

3.VVDI Pro Options Deion

(1) “EEPROM”: data storage space, it can read & write in protected status.
(2) “EROM”: program memory space (equal to other chip’s FLASH space), it can read & write in unprotected status.
(3) “Protected”: click “Protected” to lock chip and unable to read out chip data.
(4) “Unprotected”: click “Unprotected” to unlock chip and able to read out chip data.
After unlock, the original data in the chip will be cleared.

5. PCF79XX Chip Function

(1) Currently PCF79XX chip support lock, unlock and read/write data.
(2) RENEW function will be added in the coming days, it will load corresponding data and directly renew key, the detailed specific car model data will be released.

Package Including:

1pc x PCF79XX-Adapter
Buy VVDI-Prog programmer, get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service

Latest Software Version: V4.3.1
Firmware Version: 1.2.2

v4.3.0 (2016-01-16)
* This version DON't need update
firmware
+ Add MC9S12XHZ256_UNSECURED,
MC9S12XHZ384_UNSECURED,
MC9S12XHZ512_UNSECURED,
MC9S12XHZ256_SECURED,
MC9S12XHZ384_SECURED,
MC9S12XHZ512_SECURED options
in <4-IMMOBILIZER>->
Mask:(0M80F,1M80F)
+ Add [V850ES/Sx3]series:
D70F3333,
D70F3334,
D70F3335,
D70F3336,
D70F3340,
D70F3341,
D70F3342,
D70F3343,
D70F3350,
D70F3351,
D70F3352,
D70F3353,
D70F3344,
D70F3345,
D70F3346,
D70F3347,
D70F3348,
D70F3354,
D70F3355,
D70F3356,
D70F3357,
D70F3358,
D70F3364,
D70F3365,
D70F3366,
D70F3367,
D70F3368 options
[V850ES/Fx3]series:
D70F3370A,
D70F3371,
D70F3372,
D70F3373,
D70F3374,
D70F3375,
D70F3376A,
D70F3377A,
D70F3378,
D70F3379,
D70F3380,
D70F3381,
D70F3382,
D70F3383,
D70F3384,
D70F3385 options
[V850ES/Hx2]series:
D70F3700,
D70F3701,
D70F3702,
D70F3703,
D70F3704,
D70F3706,
D70F3707,
D70F3709,
D70F3710,
D70F3711,
D70F3712 options
[V850E2/Fx4-G]series:
D70F4177,
D70F4178,
D70F4179,
D70F4180 options
in <2-MCU>->
+ Add EIZ-W220(ST12)
in <4-IMMOBILIZER>->
+ Add ORIGINAL-315M-IN-CIRCUIT,
ORIGINAL-315M-CHIP,
ORIGINAL-868M-IN-CIRCUIT,
ORIGINAL-868M-CHIP options in
<6-REMOTE>->
* Modify the EXCELLE(2013--)BCM,
EXCELLE-GT(2013--)BCM,
EXCELLE(2014) options in
<4-IMMOBILIZER>->:
Remove the D-FLASH option
* Modify the CAS4-5M48H-R/W/UNLOCK,
CAS4-1N35H-R/W/UNLOCK options
in <4-IMMOBILIZER>->:
Autoset the D-FLASH partition
size as 32K while writing the
D-FLASH data

v4.1.4 (2015-12-11)
* This version DON't need update
firmware
* Fix when the partition size
information error in MC9S12XE
series chips manual set the
partition size function error
problem





v4.1.3 (2015-12-11)
* This version DON't need update
firmware
+ Add PA28F200B5T(PSOP44),
PA28F200B5B(PSOP44),
PA28F200BVT(PSOP44),
PA28F200BVB(PSOP44),
PA28F200BXT(PSOP44),
PA28F200BXB(PSOP44),
PA28F400B5T(PSOP44),
PA28F400B5B(PSOP44),
PA28F400BVT(PSOP44),
PA28F400BVB(PSOP44),
PA28F400BXT(PSOP44),
PA28F400BXB(PSOP44),
PA28F800B5T(PSOP44),
PA28F800B5B(PSOP44),
PA28F800BVT(PSOP44),
PA28F800BVB(PSOP44),
PA28F800BXT(PSOP44),
PA28F800BXB(PSOP44),
TB28F200B5T(PSOP44),
TB28F200B5B(PSOP44),
TB28F200BVT(PSOP44),
TB28F200BVB(PSOP44),
TB28F200BXT(PSOP44),
TB28F200BXB(PSOP44),
TB28F400B5T(PSOP44),
TB28F400B5B(PSOP44),
TB28F400BVT(PSOP44),
TB28F400BVB(PSOP44),
TB28F400BXT(PSOP44),
TB28F400BXB(PSOP44),
TB28F800B5T(PSOP44),
TB28F800B5B(PSOP44),
TB28F800BVT(PSOP44),
TB28F800BVB(PSOP44),
TB28F800BXT(PSOP44),
TB28F800BXB(PSOP44)options
in <1-EEPROM&FLASH>->
(Need the TB28FXXX adapter)
+ Add XP8000E option in
<3-ECU>->
+ Add BCM-XEQ384 option in
<4-IMMOBILIZER>->
+ Add Laguna BCM(2010--)option in
<4-IMMOBILIZER>->
+ Add EXCELLE(2011--)(3L16Y)option
in <5-DASHBORAD>->
* Fix the MC9S12XE series
"read partition" software bug
* Change the default connection
diagram size to 50%

v4.12 (2015-11-27)
* This version DON't need update
firmware
+ Add MC9S12A64_UNSECURED
MC9S12D64_UNSECURED
MC9S12DJ64_UNSECURED
MC9S12A128_UNSECURED
MC9S12DB128_UNSECURED
MC9S12DG128_UNSECURED
MC9S12DJ128_UNSECURED
MC9S12DT128_UNSECURED
MC9S12HZ128_UNSECURED
MC9S12KG128_UNSECURED
MC9S12KT128_UNSECURED
MC9S12A256_UNSECURED
MC9S12DG256_UNSECURED
MC9S12DJ256_UNSECURED
MC9S12DP256_UNSECURED
MC9S12DT256_UNSECURED
MC9S12HZ256_UNSECURED
MC9S12KG256_UNSECURED
MC9S12KT256_UNSECURED
MC9S12XA128_UNSECURED
MC9S12XB128_UNSECURED
MC9S12XD128_UNSECURED
MC9S12XDG128_UNSECURED
MC9S12XA256_UNSECURED
MC9S12XB256_UNSECURED
MC9S12XD256_UNSECURED
MC9S12XDQ256_UNSECURED
MC9S12XDT256_UNSECURED
MC9S12XDT384_UNSECURED
MC9S12XDA512_UNSECURED
MC9S12XDP512_UNSECURED
MC9S12XDT512_UNSECURED options
in <2-MCU>->, support
auto detect the clk frequency,
read/write the unsecured chip
with standard BDM interface
+ Add MC9S12XA128,MC9S12XB128,
MC9S12XD128,MC9S12XDG128 options
in <2-MCU>->
Mask:(0M42E,1M42E,2M42E)
+ Add MC9S12XA256,MC9S12XB256,
MC9S12XD256,MC9S12XDQ256,
MC9S12XDT256 options
in <2-MCU>->
Mask:(0M84E,1M84E)
+ Add BCM-XDT384,BCM-XEG384 options
in <4-IMMOBILIZER>->
+ Add BCM-XDT384,BCM-XEG384 options
in <4-IMMOBILIZER>->
+ Add BCM-XDT384,BCM-XEG384 options
in <4-IMMOBILIZER>->
+ Add EXCELLE(2013--)BCM,
EXCELLE-GT(2013--)BCM options
in <4-IMMOBILIZER>->
+ Add MG7 option
in <4-IMMOBILIZER>->
+ Add EIZ-SPRINTER(2015--) option
in <4-IMMOBILIZER>->
+ Add ZAFIRA-DG128,ASTRA-DG128
options in <4-IMMOBILIZER>->
-------------------------------------
v4.1.1 (2015-11-19)
* This version DON't need update
firmware
+ Add Delphi ECU MT20U2-2L33V
option in <3-ECU>->
+ Add NEW SAIL BCM option in
<4-IMMOBILIZER>->
+ Add ROEWE750 immobox option in
<4-IMMOBILIZER>->
+ Add EXCELLE 2014 option in
<5-DASHBORAD>->
* Fix display problem while check
failure
-------------------------------------
v4.1.0 (2015-11-13)
* This version DON't need update
firmware
+ Add MC9S12XEA256_UNSECURED
MC9S12XEG256_UNSECURED
MC9S12XET256_UNSECURED
MC9S12XEG384_UNSECURED
MC9S12XEQ384_UNSECURED
MC9S12XES384_UNSECURED
MC9S12XEQ512_UNSECURED
MC9S12XET512_UNSECURED
MC9S12XEP768_UNSECURED
MC9S12XEP100_UNSECURED options
in <2-MCU>->, support
auto detect the clk frequency,
read/write the unsecured chip
with standard BDM interface
+ Add Delphi ECU ME20U2-XET256,
ME20U2-XET512 options in
<3-ECU>->
+ Add Delphi ECU MT22-XEP768,
MT60-XEP768 options in
<3-ECU>->
+ Add CAS3-2K79X,CAS3-0L01Y,
CAS3+(0L15Y),CAS3+(0M23S) options
in <4-IMMOBILIZER>->
* Fix SIEMENS VDO IMMOBILIZER
read error problem

V3.8.0 Update (2015-09-22):