Новый Кодировщик ключей BMW позволяет программировать и редактировать через OBD2 все CAS1 CAS2 CAS3 CAS3 + для BMW, MINI, ROLLES ROYES.
The new BMW keycoder is the first tool in the world who can program and edit all CAS1 CAS2 CAS3 CAS3+ for BMW, MINI, ROLLES ROYES by OBD2.
Features (особенности):
Read/write/save all CAS by OBD2;
Programming 10 keys by OBD2 from 2004 to 2010 in 10 secondes;
No need to downgrade CAS version updated by ISTA up to v38 (from 2010y);
It can program used key with PCF7942/PCF7944 if you know ISK of old key by OBD2;
Syncronisation CAS/EGS, CAS/DDE, CAS/ELV by OBD2;
Programming mielage correction by OBD2;
Change VIN number in all CAS module and UIF by OBD2;
Enable/disable EWS function in EGS module by OBD2;
Setting comfort access and remote control by OBD2;
Extract fa code from all CAS by OBD2;
Programming key on lastest BMW from 2010-2011 with latest technology Ews4_SK (original key must be present);
Programming of new key (transponder, remote control, id-transmitter (for keyless-go);
Programming key or transponder direclty in the ignition coil!!!;
Programming of used key - you can enter key data manually or you can load data from CAS EEPROM dump;
Recode CAS to change ammount of allowed keyless-go keys;
Block/unblock keys, change key memory number;
Read/write, VIN Number;
Read/write VIN in instrument cluster, LM or FRM;
Pro version:
CAS editor full control over keys data (it's for advanced users and will not be used for simple jobs);
Key editor read/write key directly in ignition lock like hitag2 programmer;
Restoration of synchronization of remote control in keys if it's lost;
Read/write EEPROM in CAS3/3+ as it stored in mcu via OBD2;
Car supported: E60/ E61 /E63 /E64/ E65/ E70/ E71/ E87/ E90/ E91/ E92/ E93 X6 X5
Форум Invision Power Board (http://nulled.cc)
© Invision Power Services (http://nulled.cc)