Версия для печати темы

Нажмите сюда для просмотра этой темы в обычном формате

Форум автодиагностов _ Программаторы / Программаторы автоключей и пр. _ R250S PROGRAMMER

Автор: Владимир 25.4.2016, 11:06


Внутрисхемный программатор R250S для изменения пробега в приборных панелях производства Siemens/VDO собранных на процессореMicronas CDC3217/CDC3297 c микросхемой памяти 24c32

Product Description:
Programs the new Audi A3/TT 2007 and new VW Golf5/Passat 2007 made by Siemens VDO starting from June 2006 . In the year 2006, starting from May, Siemens/VDO has added a new cryptography system that avoids reprogramming.
Micronas CDC3217 / 2432

Features:
Programs the new Audi A3/TT 2007 and new VW Golf5/Passat 2007 made by Siemens VDO starting from June 2006 up to today! This interface dongle needs to be connected, through an RS232 serial interface, to a PC running Win98/Me/XP

Ingredients:
In the year 2006, starting from May, Siemens/VDO has added a new cryptography system that avoids reprogramming.
By using our new R250 interface you can program also this new version with no problem.

Instructions to Use
Our interface looks like a small box that needs to be connected to a PC running Win98/Me/XP.
You only need to solder few wires to the board, read back the actual value and then write
the new value with no limitations at all. Just one thing: remember that this interface works only
with boards made by Siemens VDO featuring a Micronas microcontroller CDC3217 or CDC3297 and 24c32 or 2432 eeprom memory.
We produce two versions named R250N and R250S. The first one needs to be connected to our programmer,
the second one needs only a PC with a free RS232 connector or USB-RS232 adapter.

Форум Invision Power Board (http://nulled.cc)
© Invision Power Services (http://nulled.cc)

Ошибка работы драйвера БД

Ошибка при работе с базой данных

Возникла проблема при работе с базой данных.
Вы можете попробовать обновить эту страницу, нажав сюда