46/4D/48 ADAPTER PLUS FOR SKP-900 KEY PROGRAMMER, $500 Опции

[Владимир]

46/4D/48 ADAPTER PLUS FOR SKP-900 KEY PROGRAMMER

$500
Instruction for copy 46/4D/48 chips
1. The SKP-900 and adapter connected, the SKP-900 inserted into the vehicle OBD, prepare to copy the original car keys and 46/4D/48 chips.
2. Special features into the SKP-900----chip key copy---46/4D/48 chip copy, which has four options, according to the order entered were 1-2-3-4.
3. Firstly enter 1 and read original key ID, then place the original key near the adapter and press YES, the original key ID will be read. If it says reading error, please check if the key chip is 46/4D/48, or adjust the position of the key and reading coil, and re-read the key ID. After reading key ID, press NO to return.
4. Enter 2 and get collector information: place the collector already with collected data near reading coil (refer to the user manual for the collector user manual), press YES to go on. At this situation, the collector data indicator (green) will flash, the screen displays the collector data. Then press NO to return.
5. Enter 3 and decode original chip, press YES to continue. The screen will display: working, please wait...... It normally takes about 5-30 seconds. (may need 4 minutes in some case). If the decoding failed, please re-collecting data and re-do step 3 and step 4. If the decoding successes, please press NO to return.
6. Enter 4 and create clone chip, place the copy-able 46/4D/48 chip near the reading coil, press YES to continue, copy successes 1 second later; if not, please adjust the position of the coil and chip, or replace the chip can be copied.

Note:
1. To avoid collecting less data before data collection, the first collector attached to the coil, and then plug the key and twist to ON.
2. How to determine the collection of data is correct, see the red light flashed after the acquisition, then the original car key in the ON position, directly turn on the car once, if the car can be turned on, indicating that the data collected is correct. If it can not the turn on the car, please empty the data and re-acquisition.