46/4D/48 ADAPTER PLUS FOR SKP-900 KEY PROGRAMMER, $500 |
НАШИ КОНТАКТЫ: +38 044-36-01-148 +38 050-598-74-90 +38 098-415-60-60 +38 094-92-48-148 e-mail: kiev0443601148@gmail.com Telegram: @nanoport1 |
Здравствуйте, гость ( Вход | Регистрация )
46/4D/48 ADAPTER PLUS FOR SKP-900 KEY PROGRAMMER, $500 |
13.5.2016, 21:21
Сообщение
#1
|
|||
Главный администратор Группа: Главные администраторы Сообщений: 21350 Регистрация: 21.4.2009 Из: Украина Пользователь №: 1 |
46/4D/48 ADAPTER PLUS FOR SKP-900 KEY PROGRAMMER
Instruction for copy 46/4D/48 chips 1. The SKP-900 and adapter connected, the SKP-900 inserted into the vehicle OBD, prepare to copy the original car keys and 46/4D/48 chips. 2. Special features into the SKP-900----chip key copy---46/4D/48 chip copy, which has four options, according to the order entered were 1-2-3-4. 3. Firstly enter 1 and read original key ID, then place the original key near the adapter and press YES, the original key ID will be read. If it says reading error, please check if the key chip is 46/4D/48, or adjust the position of the key and reading coil, and re-read the key ID. After reading key ID, press NO to return. 4. Enter 2 and get collector information: place the collector already with collected data near reading coil (refer to the user manual for the collector user manual), press YES to go on. At this situation, the collector data indicator (green) will flash, the screen displays the collector data. Then press NO to return. 5. Enter 3 and decode original chip, press YES to continue. The screen will display: working, please wait...... It normally takes about 5-30 seconds. (may need 4 minutes in some case). If the decoding failed, please re-collecting data and re-do step 3 and step 4. If the decoding successes, please press NO to return. 6. Enter 4 and create clone chip, place the copy-able 46/4D/48 chip near the reading coil, press YES to continue, copy successes 1 second later; if not, please adjust the position of the coil and chip, or replace the chip can be copied. Note: 1. To avoid collecting less data before data collection, the first collector attached to the coil, and then plug the key and twist to ON. 2. How to determine the collection of data is correct, see the red light flashed after the acquisition, then the original car key in the ON position, directly turn on the car once, if the car can be turned on, indicating that the data collected is correct. If it can not the turn on the car, please empty the data and re-acquisition. -------------------- Продление подписки сканеров Launch и Thinkcar. Подключение к серверам LVS, Dz, XPRO5, XdiagPro3, ProDiag...
Купить PRS файлы для DAF и программу для их генерации Обновление Launch x431 Pro3S DBScar-2 и пр. с номерами 982691566350 и 985491545200. Обновление сканеров CarmanScan VDF files for MAN cars КОНТАКТЫ: +38 050-598-74-90 Viber/Telegram +38 098-415-60-60 +38 093-933-00-30 +38 094-92-48-148 WhatsApp e-mail: kiev0443601148@gmail.com НАШИ ГРУППЫ: Автодиагностическое оборудование https://www.facebook.com/groups/2868758516488981/ Оборудование компании Лаунч https://www.facebook.com/groups/318690072136232/ WinOLS https://www.facebook.com/groups/295433954728961/ ОБНОВЛЕНИЕ СКАНЕРОВ ЛАУНЧ https://t.me/+Lp1QWpmsnQIwYTYy Автодиагностика, ЧИП-Тюнинг ... https://t.me/autodiagnostics_chiptuning Ремонт гибридов и электромобилей https://t.me/joinchat/zci4HI0JU7MyMGEy Все наши видео на ЮТУБе: <a href="https://www.youtube.com/@LVS-5/videos" target="_blank">https://www.youtube.com/@LVS-5/videos</a> --- Карта Приват банка Украины 5457 0822 9027 8659 Лесных Владимир Федорович --- Карта Сбербанка РФ 2202 2061 1550 4495 Екатерина Владимировна Л.[color="#000080"][/color] |
||
|
|||
Текстовая версия | Сейчас: 4.11.2024, 23:55 |